Storage device
Status:
This information relates to ConSys version 1.24.97
Contents:
Other links:
Overview
Address fields:
a0: Data type,
see table below
a1: Value index, see table below for max index for each value type
a2: Hash key
Limits on floating point values, should be posible to set as separate parameters:
Ex.
float, index
lower, index
upper, index
parameter |
Suggested |
Parameter description |
Data Type |
Max. |
Interpretation |
Comment |
0 |
|
|
Double |
99 |
|
|
1 |
|
|
Bit |
99 |
|
|
2 |
|
|
Word |
29 |
|
|
3 |
|
|
String |
49 |
|
|
4 |
|
|
Time |
19 |
|
|
5 |
Store |
Store settings |
Bit |
|
Pulse bit, store when a bit with value one is send to the device |
Forces the storage device to store its values if a storage file is defined in the device configuration |
6 | double, lower limit | Double | 99 | Set the lower limit for Double parameter at same index. | ||
7 |
double, upper limit | Double | 99 | Set the upper limit for Double parameter at same index. | ||
8 | CDataValue | 19 |
Used to store any data value. Remark: FOR THE MOMENT NOT PERSISTENT STORED - AS
PRESSENTLY ONLY NEEDED FOR DEBUG PURPOSES. Availeble from ConSys version 1.24.97 |
|||
9 | PulseBit | Bit, Check Box | 19 | Say 434 | This is a real Pulse Bit, where the pulsing is controlled by the device (i.e. more than one client can activate the pulser). The time for a pulse is controlled by the PulseTime parameter with the same a1 index. | |
10 | PulseTime | Word | 19 | say 600 |
The time (in seconds) that the corresponding PulseBit (same a1 index) is kept
high (after a true is send to the PulseBit). Default value is 10 (s) |
Last Modified 16 May 2024