BeamPos versions
This document contains version information for the ConSys BeamPos Program.
Bugs/Ideas:
- Poll-loop for HP8753 does not work => GPIB timeout for long DAFs.
- At meas stop is reported "no communication" for long DAFs
- If a pickup is changed a long time before the actual measurement do not report "pickup changed during measuremet". Just accept the measurement.
Missing implemetations (low priority):
- HP4195A (and perhaps 8753) does not report error if wrong GPIB address.
- The analyzers are not put into local after use.
Version 1.17.72.74 (20/11-02 JSN):
* Corrected Qpol numbering so 0 (zero) is QMH12.
Version 1.11.40.41 (24/11-00 JSN):
Added Scanned pickup multiplexer, and Qpol Shunt measure at flattop (timed Qshunt Enable) (Testet (debugged) during VUV D- run)
Version 1.7.22.23 (22/12-99 JSN):
SimpleQpolShunt implemented. Testet (debugged) during Mg-run.
Version 1.7.21.22 (25/11-99 JSN):
TEMP VERSION. In progress of implementing SimpleQpolShunt measuring.
Version 1.7.21.21 (11/11-99 JSN):
HP4195 now works in control-room. Simple dialog box for calibration editing.
Version 1.6.17.19 (19/10-99 JSN):
First Release. Setups can now be saved. Still crude editing
Version 1.6.17.18 (15/10-99 JSN):
Pickups can now be calibrated by transfer, but cannot be edited directly. Setup cannot saved (the shell is there).
Version 1.6.17.16 (28/9-99 JSN):
First version which can do something. Analysers working. Calibrations cannot be edited or saved.
Last Modified 14 January 2019