Magnetic Valve Control - Remote Control
Remote Control :
It is only possible to remote the functions when the switch on the front panel is put in remote.
Pin 4on the 25 poles SUB-D connector indicate the position of the switch : Manual (0) / Remote (1)
From the 25 poles SUB-D connector it is possible to read the status of the six valves,
but if the board is in "Remote control" mode can every valve be switch ON or OFF.
Pin connection for Remote Control :
25 poles (SUB-D-female) | CON-1 | . |
Pin : | Function : | In / Out |
1 | Remote control of magnetic valve 1, On (0) Off (1) | in |
2 | Remote control of magnetic valve 3, On (0) Off (1) | in |
3 | Remote control of magnetic valve 5, On (0) Off (1) | in |
4 | Tells position of the manual switch, Manual (1) / Remote (0) | out |
5 | GND | out |
6 | Status from magnetic valve 2, pin 4 | out |
7 | Status from magnetic valve 4, pin 4 | out |
8 | Status from magnetic valve 6, pin 4 | out |
9 | Status from magnetic valve 2, pin 3 | out |
10 | Status from magnetic valve 4, pin 3 | out |
11 | Status from magnetic valve 6, pin 3 | out |
12 | nc. | . |
13 | nc. | . |
14 | Remote control of magnetic valve 2, On (0) Off (1) | in |
15 | Remote control of magnetic valve 4, On (0) Off (1) | in |
16 | Remote control of magnetic valve 6, On (0) Off (1) | in |
17 | Vcc +5V | out |
18 | Status from magnetic valve 1, pin 4 | out |
19 | Status from magnetic valve 3, pin 4 | .out |
20 | Status from magnetic valve 5, pin 4 | out |
21 | Status from magnetic valve 1, pin 3 | out |
22 | Status from magnetic valve 3, pin 3 | out |
23 | Status from magnetic valve 5, pin 3 | out |
24 | Vcc +5V | out |
25 | GND | out |
Last Modified 11 January 2019